This keeps a list of defines for pcsc-lite. More...

#include <wintypes.h>

Data Structures
struct	SCARD_READERSTATE

struct	SCARD_IO_REQUEST
	Protocol Control Information (PCI) More...

Macros
#define	MAX_ATR_SIZE 33
	Maximum ATR size.

#define	SCARD_PCI_T0 (&g_rgSCardT0Pci)
	protocol control information (PCI) for T=0

#define	SCARD_PCI_T1 (&g_rgSCardT1Pci)
	protocol control information (PCI) for T=1

#define	SCARD_PCI_RAW (&g_rgSCardRawPci)
	protocol control information (PCI) for RAW protocol

#define	SCARD_S_SUCCESS ((LONG)0x00000000)
	No error was encountered.

#define	SCARD_F_INTERNAL_ERROR ((LONG)0x80100001)
	An internal consistency check failed.

#define	SCARD_E_CANCELLED ((LONG)0x80100002)
	The action was cancelled by an SCardCancel request.

#define	SCARD_E_INVALID_HANDLE ((LONG)0x80100003)
	The supplied handle was invalid.

#define	SCARD_E_INVALID_PARAMETER ((LONG)0x80100004)
	One or more of the supplied parameters could not be properly interpreted.

#define	SCARD_E_INVALID_TARGET ((LONG)0x80100005)
	Registry startup information is missing or invalid.

#define	SCARD_E_NO_MEMORY ((LONG)0x80100006)
	Not enough memory available to complete this command.

#define	SCARD_F_WAITED_TOO_LONG ((LONG)0x80100007)
	An internal consistency timer has expired.

#define	SCARD_E_INSUFFICIENT_BUFFER ((LONG)0x80100008)
	The data buffer to receive returned data is too small for the returned data.

#define	SCARD_E_UNKNOWN_READER ((LONG)0x80100009)
	The specified reader name is not recognized.

#define	SCARD_E_TIMEOUT ((LONG)0x8010000A)
	The user-specified timeout value has expired.

#define	SCARD_E_SHARING_VIOLATION ((LONG)0x8010000B)
	The smart card cannot be accessed because of other connections outstanding.

#define	SCARD_E_NO_SMARTCARD ((LONG)0x8010000C)
	The operation requires a Smart Card, but no Smart Card is currently in the device.

#define	SCARD_E_UNKNOWN_CARD ((LONG)0x8010000D)
	The specified smart card name is not recognized.

#define	SCARD_E_CANT_DISPOSE ((LONG)0x8010000E)
	The system could not dispose of the media in the requested manner.

#define	SCARD_E_PROTO_MISMATCH ((LONG)0x8010000F)
	The requested protocols are incompatible with the protocol currently in use with the smart card.

#define	SCARD_E_NOT_READY ((LONG)0x80100010)
	The reader or smart card is not ready to accept commands.

#define	SCARD_E_INVALID_VALUE ((LONG)0x80100011)
	One or more of the supplied parameters values could not be properly interpreted.

#define	SCARD_E_SYSTEM_CANCELLED ((LONG)0x80100012)
	The action was cancelled by the system, presumably to log off or shut down.

#define	SCARD_F_COMM_ERROR ((LONG)0x80100013)
	An internal communications error has been detected.

#define	SCARD_F_UNKNOWN_ERROR ((LONG)0x80100014)
	An internal error has been detected, but the source is unknown.

#define	SCARD_E_INVALID_ATR ((LONG)0x80100015)
	An ATR obtained from the registry is not a valid ATR string.

#define	SCARD_E_NOT_TRANSACTED ((LONG)0x80100016)
	An attempt was made to end a non-existent transaction.

#define	SCARD_E_READER_UNAVAILABLE ((LONG)0x80100017)
	The specified reader is not currently available for use.

#define	SCARD_P_SHUTDOWN ((LONG)0x80100018)
	The operation has been aborted to allow the server application to exit.

#define	SCARD_E_PCI_TOO_SMALL ((LONG)0x80100019)
	The PCI Receive buffer was too small.

#define	SCARD_E_READER_UNSUPPORTED ((LONG)0x8010001A)
	The reader driver does not meet minimal requirements for support.

#define	SCARD_E_DUPLICATE_READER ((LONG)0x8010001B)
	The reader driver did not produce a unique reader name.

#define	SCARD_E_CARD_UNSUPPORTED ((LONG)0x8010001C)
	The smart card does not meet minimal requirements for support.

#define	SCARD_E_NO_SERVICE ((LONG)0x8010001D)
	The Smart card resource manager is not running.

#define	SCARD_E_SERVICE_STOPPED ((LONG)0x8010001E)
	The Smart card resource manager has shut down.

#define	SCARD_E_UNEXPECTED ((LONG)0x8010001F)
	An unexpected card error has occurred.

#define	SCARD_E_UNSUPPORTED_FEATURE ((LONG)0x8010001F)
	This smart card does not support the requested feature.

#define	SCARD_E_ICC_INSTALLATION ((LONG)0x80100020)
	No primary provider can be found for the smart card.

#define	SCARD_E_ICC_CREATEORDER ((LONG)0x80100021)
	The requested order of object creation is not supported.

#define	SCARD_E_DIR_NOT_FOUND ((LONG)0x80100023)
	The identified directory does not exist in the smart card.

#define	SCARD_E_FILE_NOT_FOUND ((LONG)0x80100024)
	The identified file does not exist in the smart card.

#define	SCARD_E_NO_DIR ((LONG)0x80100025)
	The supplied path does not represent a smart card directory.

#define	SCARD_E_NO_FILE ((LONG)0x80100026)
	The supplied path does not represent a smart card file.

#define	SCARD_E_NO_ACCESS ((LONG)0x80100027)
	Access is denied to this file.

#define	SCARD_E_WRITE_TOO_MANY ((LONG)0x80100028)
	The smart card does not have enough memory to store the information.

#define	SCARD_E_BAD_SEEK ((LONG)0x80100029)
	There was an error trying to set the smart card file object pointer.

#define	SCARD_E_INVALID_CHV ((LONG)0x8010002A)
	The supplied PIN is incorrect.

#define	SCARD_E_UNKNOWN_RES_MNG ((LONG)0x8010002B)
	An unrecognized error code was returned from a layered component.

#define	SCARD_E_NO_SUCH_CERTIFICATE ((LONG)0x8010002C)
	The requested certificate does not exist.

#define	SCARD_E_CERTIFICATE_UNAVAILABLE ((LONG)0x8010002D)
	The requested certificate could not be obtained.

#define	SCARD_E_NO_READERS_AVAILABLE ((LONG)0x8010002E)
	Cannot find a smart card reader.

#define	SCARD_E_COMM_DATA_LOST ((LONG)0x8010002F)
	A communications error with the smart card has been detected. More...

#define	SCARD_E_NO_KEY_CONTAINER ((LONG)0x80100030)
	The requested key container does not exist on the smart card.

#define	SCARD_E_SERVER_TOO_BUSY ((LONG)0x80100031)
	The Smart Card Resource Manager is too busy to complete this operation.

#define	SCARD_W_UNSUPPORTED_CARD ((LONG)0x80100065)
	The reader cannot communicate with the card, due to ATR string configuration conflicts.

#define	SCARD_W_UNRESPONSIVE_CARD ((LONG)0x80100066)
	The smart card is not responding to a reset.

#define	SCARD_W_UNPOWERED_CARD ((LONG)0x80100067)
	Power has been removed from the smart card, so that further communication is not possible.

#define	SCARD_W_RESET_CARD ((LONG)0x80100068)
	The smart card has been reset, so any shared state information is invalid.

#define	SCARD_W_REMOVED_CARD ((LONG)0x80100069)
	The smart card has been removed, so further communication is not possible.

#define	SCARD_W_SECURITY_VIOLATION ((LONG)0x8010006A)
	Access was denied because of a security violation.

#define	SCARD_W_WRONG_CHV ((LONG)0x8010006B)
	The card cannot be accessed because the wrong PIN was presented.

#define	SCARD_W_CHV_BLOCKED ((LONG)0x8010006C)
	The card cannot be accessed because the maximum number of PIN entry attempts has been reached.

#define	SCARD_W_EOF ((LONG)0x8010006D)
	The end of the smart card file has been reached.

#define	SCARD_W_CANCELLED_BY_USER ((LONG)0x8010006E)
	The user pressed "Cancel" on a Smart Card Selection Dialog.

#define	SCARD_W_CARD_NOT_AUTHENTICATED ((LONG)0x8010006F)
	No PIN was presented to the smart card.

#define	SCARD_AUTOALLOCATE (DWORD)(-1)
	see SCardFreeMemory()

#define	SCARD_SCOPE_USER 0x0000
	Scope in user space.

#define	SCARD_SCOPE_TERMINAL 0x0001
	Scope in terminal.

#define	SCARD_SCOPE_SYSTEM 0x0002
	Scope in system.

#define	SCARD_SCOPE_GLOBAL 0x0003
	Scope is global.

#define	SCARD_PROTOCOL_UNDEFINED 0x0000
	protocol not set

#define	SCARD_PROTOCOL_UNSET SCARD_PROTOCOL_UNDEFINED /* backward compat */

#define	SCARD_PROTOCOL_T0 0x0001
	T=0 active protocol.

#define	SCARD_PROTOCOL_T1 0x0002
	T=1 active protocol.

#define	SCARD_PROTOCOL_RAW 0x0004
	Raw active protocol.

#define	SCARD_PROTOCOL_T15 0x0008
	T=15 protocol.

#define	SCARD_PROTOCOL_ANY (SCARD_PROTOCOL_T0\|SCARD_PROTOCOL_T1)
	IFD determines prot.

#define	SCARD_SHARE_EXCLUSIVE 0x0001
	Exclusive mode only.

#define	SCARD_SHARE_SHARED 0x0002
	Shared mode only.

#define	SCARD_SHARE_DIRECT 0x0003
	Raw mode only.

#define	SCARD_LEAVE_CARD 0x0000
	Do nothing on close.

#define	SCARD_RESET_CARD 0x0001
	Reset on close.

#define	SCARD_UNPOWER_CARD 0x0002
	Power down on close.

#define	SCARD_EJECT_CARD 0x0003
	Eject on close.

#define	SCARD_UNKNOWN 0x0001
	Unknown state.

#define	SCARD_ABSENT 0x0002
	Card is absent.

#define	SCARD_PRESENT 0x0004
	Card is present.

#define	SCARD_SWALLOWED 0x0008
	Card not powered.

#define	SCARD_POWERED 0x0010
	Card is powered.

#define	SCARD_NEGOTIABLE 0x0020
	Ready for PTS.

#define	SCARD_SPECIFIC 0x0040
	PTS has been set.

#define	SCARD_STATE_UNAWARE 0x0000
	App wants status.

#define	SCARD_STATE_IGNORE 0x0001
	Ignore this reader.

#define	SCARD_STATE_CHANGED 0x0002
	State has changed.

#define	SCARD_STATE_UNKNOWN 0x0004
	Reader unknown.

#define	SCARD_STATE_UNAVAILABLE 0x0008
	Status unavailable.

#define	SCARD_STATE_EMPTY 0x0010
	Card removed.

#define	SCARD_STATE_PRESENT 0x0020
	Card inserted.

#define	SCARD_STATE_ATRMATCH 0x0040
	ATR matches card.

#define	SCARD_STATE_EXCLUSIVE 0x0080
	Exclusive Mode.

#define	SCARD_STATE_INUSE 0x0100
	Shared Mode.

#define	SCARD_STATE_MUTE 0x0200
	Unresponsive card.

#define	SCARD_STATE_UNPOWERED 0x0400
	Unpowered card.

#define	INFINITE 0xFFFFFFFF
	Infinite timeout.

#define	PCSCLITE_VERSION_NUMBER "1.9.4"
	Current version.

#define	PCSCLITE_MAX_READERS_CONTEXTS 48
	Maximum readers context (a slot is count as a reader)

#define	MAX_READERNAME 128

#define	SCARD_ATR_LENGTH MAX_ATR_SIZE
	Maximum ATR size.

#define	MAX_BUFFER_SIZE 264
	Maximum Tx/Rx Buffer for short APDU.

#define	MAX_BUFFER_SIZE_EXTENDED (4 + 3 + (1<<16) + 3 + 2)
	enhanced (64K + APDU + Lc + Le + SW) Tx/Rx Buffer

Typedefs
typedef LONG	SCARDCONTEXT
	`hContext` returned by SCardEstablishContext()

typedef SCARDCONTEXT *	PSCARDCONTEXT

typedef SCARDCONTEXT *	LPSCARDCONTEXT

typedef LONG	SCARDHANDLE
	`hCard` returned by SCardConnect()

typedef SCARDHANDLE *	PSCARDHANDLE

typedef SCARDHANDLE *	LPSCARDHANDLE

typedef struct SCARD_READERSTATE *	LPSCARD_READERSTATE

typedef struct SCARD_IO_REQUEST *	PSCARD_IO_REQUEST

typedef struct SCARD_IO_REQUEST *	LPSCARD_IO_REQUEST

typedef const SCARD_IO_REQUEST *	LPCSCARD_IO_REQUEST

Functions
const char *	pcsc_stringify_error (const LONG)
	Returns a human readable text for the given PC/SC error code. More...

Variables
const SCARD_IO_REQUEST	g_rgSCardT0Pci
	Protocol Control Information for T=0.

const SCARD_IO_REQUEST	g_rgSCardT1Pci

const SCARD_IO_REQUEST	g_rgSCardRawPci

Detailed Description

This keeps a list of defines for pcsc-lite.

Error codes from http://msdn.microsoft.com/en-us/library/aa924526.aspx

Definition in file pcsclite.h.

Data Structures

Macros

Typedefs

Functions

Variables

Detailed Description